SIMULATED SERVICE CORROSION TESTING

SIMULATED SERVICE CORROSION TESTING OF ENGINE COOLANTS (CIRCULATING CORROSION) - ASTM D 2570 / JIS 2234 / IS 5759

Model Code:
SEWCC01 (single place assembly)
SEWCC02 (Two place assembly)

 

This test equipment is manufactured in accordance to JIS K 2234/ IS 5759. It consists of heating bath, circulating pump, and radiator assembly for evaluating the effects of engine coolant on metal specimens by circulation continuously for specified period under controlled laboratory conditions. It is a floor mounted bench. The temperature of the coolant sample is maintained at 88°C (190°F), flow rate is about 60 LPM and the test is continued for about 6 weeks (1000 hours).

APPARATUS CONSIST OF
Heating bathSS 316 mfg. bath, cylindrical type, accommodate three test sets, ~7 lit.. capacity.
Circulating pumpStandard automobile centrifugal pump, casing of aluminum casting and vanes of steel.
RadiatorStandard automobile radiator with a reserve container. (for coolant recovery)
Flow indicatorDigital type flow measuring device with sensor, flow control valve etc.
Upper & lower hoses/ tubesRubber hoses of automobile industry quality, SS connecting tubes
Frame workSturdy framework, ground mounted enclosure, ventilating system.
Pulleys and drive beltDriving assembly to couple the motor and the pump.
Control panelDigital temperature indicator cum controller, digital display.
Recommended SparesCirculating pumps, metal specimen set, Thermometer: ASTM 12C, etc.